Complexities that exist in making a bird house is situated on our own tastes, the more simple models that we will create will be more easily made. There are some things that absolutely be considered include: high-boxes, depth, dimension and diameter of inlet floor and the height of the hole in the floor box.

Bird House

Here are some things that can be taken into consideration in making a bird house and we need to know that the birds in search of his home was not affected by the type or model home they see but the birds tend to find a house that feels comfortable for them to live.

Ventilation: bird houses that we make must have air vents so that the conditions inside the box are not stuffy. There are several ways to make air ventilation is by providing adequate space between floors with a roof or by giving adequate hole just below the roof.

Drainage: water can be a problem for us when it was under a bird house but this can be overcome by providing adequate slope on the roof or by cutting the corners of the floor.

Accessibility: bird house should be easy to access so that we can observe the birds or when we will clean the dirt that is in the bird house. In the case of observing birds in the bird houses we can consider the placement of the bird cameras. Now it has so many available bird cameras. But in selecting these tools we must be sure that we choose are the right cameras for birds. Bird house placement of cameras can assist us in observing the birds that exist and keep the birds from other animals that try to distract the birds.

We must be careful to clean the bird house because sometimes we’ll find other animals that also live in the bird house. For example: fleas, flies, insects or even the possibility that we will find a squirrel or a rat.

Here are tips for examining bird houses:

Notice the bird house for 10-20 minutes before touching the bird house but if you have placed the bird camera then this will become easier. If we do not see or hear a voice from inside the box, whether it was the sound of birds or other animals a voice that possibility is in there then we can proceed with the action we will do the cleaning.

Manhole: make the entrance hole at the top of the front panel. Rough surface will facilitate access into the box. If the bird houses made from wood materials will need to add some indentation below the hole. Do not put perches at the entrance to the bird house. Starling birds prefer to perch, so much choose to be outside so did the predators can take advantage of this perch for birds that are lurking inside the bird house.

Cleanup: in general, bird houses can be opened from above making it easier to clean. While this tends to disturb the birds but this is the easiest. Do not forget to replace the existing pottery with pottery in the box above.