In this article we will talk about inscribing the LCD monitor in the interior of a wooden house and we will use on his body especially manufactured frame for this. We can produce it in the cellar, and cost of materials.

Wood Frame

To produce a wooden frame does not need to disassemble the monitor cabinet. Simply slide the frame is a frame on top and fixes it with screws or glue. In some systems the button control displayed on the bottom or back panel – in this case would not be necessary drill extra holes in the box under the button. Otherwise, the very framework of their close and for access to them has to shoot it every time.

In the beginning you need to measure the size of the monitor screen surface – one part, which displays the image. The frame should not obscure the screen, but should as closely as possible to cuddle up to the body of the monitor, and then the effect will be established “Wooden display.

Now we need to assemble the frame of the plates. Material should choose beautiful. The boards should not be too thick. It should be evenly sawn at right angles. There are many options for assembling the frame. For simplicity, we can use the angular connection to the glue for wood.

Once the glue dries, it is necessary to adjust from the inside framework under hull shape of the monitor and polished product, Recommended polished frame to shine with the angular with metal bowl-shaped brush to give it a rough appearance aged time.

On the fence, which serves for mounting the top frame, make an indentation so that the upper edge of the monitor came close to it, pasting the bar to the back side of the frame. The bottom edge of the frame will through holes for mounting screws to the body of the monitor.

The tip screws must not touch the monitor, otherwise it may damage it. Must be pre-measure the depth of the hole to the monitor and pick up the required length of the screw so that it was not visible and not damage the monitor.

Final finish shall make an oil-stained through three layers of Danish Oil

Wait until it is dry, Sodium surface frame with a piece of thin steel wool in the direction of fibers, maintaining a uniform pressure that will give the final gloss.

We’ll get into a frame on the monitor and secure it with screws from the bottom. Everything is ready. Wooden frame creates the effect of “a wooden screen.