There are two steps to create an iron fence to make your home safer, first by making an iron fence and then a second makes a concrete wall.

1. Create iron fence
a. There are three calligraphic motifs, boxes, and the door image as a pattern motif calligraphy 270cmx90cm gingham size 330cm x 90 cm and 90cm x 120cm doors drawings submitted on an iron welder

b. welding box motifs and calligraphy done one by one using a 19mm box steel welding hollow metal doors 4 / 4 series is a form of iron fence

c. And the latest iron fence painted effect bonze / brown wrought iron copper so memorable. This fence-making process usually takes one week

2 Make a wall
a. Dig the soil as deep as 40 cm to 30cm for the foundation and Sloof fence along the 10.2 m for each of eight local foundation measuring 40 cm x 40cm three foundations for an iron fence to calligraphy three boxes and two iron bars for doors and foundation Sloof 10mm

b. 15cm x 15cm Sloof pairs bound to distribute the load between the foundation and install a fence practical field size 15cm x 15cm 110cm above the height of the column foundations in accordance with the frequency of cast concrete walls to pour the foundation Sloof and let stand 5 days diving in order to cast dry.

c. Put the brick wall above the left-right Sloof also practical brick columns arranged alternately so that each tie interval set aside one day to dry cement plaster after it was put to the light rail pipe installation. Cast cement columns that are bound by brick let stand 2 to 3 days to dry after casting the wall stood an iron tide gate installation had punched a hole through the wall to connect through the column Sloof iron fence with iron columns and Sloof between the metal was then welded so stiff and strong fence.

Installation of the hollow iron doorstop on the floor and walls can be done by punching holes in the floor and then planting the cross on it and plug the hole in the wall bar hinges using screws and door hinges mounted on the crossbar.

Before finishing acrylic lampshade pairs of the front wall, the installation using the glue that bonded the hood and the wall connection, after it was painted after we let it stand for one day.