To achieve this mural, the wall frieze decoration, you’ll need some equipment and then follow the steps.

Wall Frieze Decoration

Equipment for carrying out the frieze wall:

- Metallic paint color Biro platinum

- A paint tray

- 1 large splatter (flat brush)

- Latex

- Plastic sheeting to protect soil

- A lint-free cotton cloth

- Tape crepe painter

- 1 level

- Wires blue mason or a pencil and a small cleat

- 1m

To accomplish this mural, follow these steps:

1 – You must first you decide to go that high you place your wall frieze, and its width will be.

2 – Measure from the ground, your height (mark) plus the width of your molding (mark your wall again).

3 – Repeat the operation every few feet along the wall. Draw your face with the cleat or the blue wire.

4 – Place the tape along your marks to form a band. Make sure using your level preparatory work is straight. You must make sure that the tape is very well stick crepe so that the paint does not below.

5 – Before you pour your paint into the tray, shake vigorously paint for metallic pigments and binders are mixed.

6 – Dip splatter generously in the paint and rub between crepe ribbons on your wall.

7 – Work by length of wall. Do not wait until the paint dries.

8 – Scrunch the cloth and make a ball. Put your gloves and dab the wet paint with the cloth into a ball, Formed each time the ball of cloth when it becomes too saturated with paint.

Veins will appear gradually after buffered painting.

9 – As soon as the transaction is completed on your wall section, remove the tape immediately before the paint is dry to wet cotton swab to catch up any drips.